Your roof can develop problems such as leaks years before you need to replace your entire roofing system. Most of the times, these leaks are a result of localized damage like missing or cracked shakes or shingles, or on a flat roof, a cracked or blistered area.  

The hardest part when it comes to repairing this type of damage is on how to locate it. In this post, you will be able to learn how to find and fix leaks on shingle roofs, as well as some important maintenance that needs to be done in order to make sure that your roof will keep its good condition in a longer period of time.  

However, while these tips can be done by an average homeowner who has knowledge and experience in repairing a shingle roof, it is still strongly recommended that you hire an experienced and professional roofing contractor to make sure that the task will be done in the most appropriate, safest and efficient way possible. Usually, shingle roofs are easy to fix. Try to find the marked leak point and then look for curled, damaged or even missing shingles. However, ff this method will not work, it is best that you hire a professional Tampa roofing contractor like right away. 

After that, at every part where two surfaces meet as well every vent or chimney, try to look for breaks in the caulking or flashing or for gaps in the roof cement lines. If you think you can’t see the damage or cause of leak to the flashing or shingles in the leak area, it is imperative that you call a professional roofing contractor since the issue might be the deteriorating of your shingles or inadequate flashing. Both of these problems actually need a professional service as improper fixes for these issues will certainly lead to a costlier repair. If you are able to find any evidence that your shingles roof has any problem, the fixes for these are fairly easy.  

Shingles that are curled back can be easily reattached using asphalt roof cement or any compound in tubes that can be used with a caulking gun. During warm season, you can simply straighten out the shingle roof that has curled back. On the other hand, shingles can become very brittle during cold season and should be softened first before you try to flatten them out. In order to soften the shingle, use a propane torch that has a flame spreader nozzle.  

Carefully apply the flame to the shingle’s curled edges until it gets warm enough to soften the shingle but not too hot to catch fire. After that, you can flatten the shingle’s curled edges. In order to reattach the straightened shingle, use roof cement and apply generously to the bottom and a few applications of cement at the corners is also enough to hold the shingle. Firmly press the shingle into place.